Marine
Plywood by Homestead |
|
| Solid boards and planks | |
| Lonseal Interior Flooring | |
| View Shopping Cart | |
| Home | |
| Quote and Order Form | |
| Map to us | |
| Contact Us | |
| Marine
Plywood by Homestead |
|
| Solid boards and planks | |
| Lonseal Interior Flooring | |
| View Shopping Cart | |
| Home | |
| Quote and Order Form | |
| Map to us | |
| Contact Us | |
|
Teak Faced Marine Plywood |
|
|
|
 |
|
|
|
| Click on a picture to see a larger view | ||||
| Please note: Measurements in inches are nominal. Actual measurement is in mm. Face veneer thickness is measured before sanding. | ||||
|
|
||||
| Species |
Teak Faced |
Thickness |
Price Per Sheet 1 to 5 sheets Teak see below for quantity discounts |
|
 Click for larger image |
Teak |
4' x
8' Standard |
6mm (1/4") |
$110.00 |
| 9mm (3/8") | $115.00 | |||
| 12mm (1/2") | $150.00 | |||
|
Teak |
4'
x 8' Standard 2 sided Marine Grade .6 mm Face Veneer |
|||
| 18mm (3/4") | $216.00 | |||
|
Teak |
4'
x10' Premium 1 sided Marine Grade 1.2mm face veneer |
6mm (1/4") |
$Call for quote not a stock item |
|
| 9mm (3/8") |
$Call for quote not a stock item |
|||
| 12mm (1/2") | $Call
for quote
not a stock item |
|||
| 18mm (3/4") | $Call
for quote not a stock item |
|||
|
Teak 6-10 shts = 5% disc 11-20 shts = 10% disc 21 or more=15%disc Full units =contact us Can be combined with other plywood species and thicknesses to get discount. |
||||
| Please note: Measurements in inches are nominal. Actual measurement is in mm. Face veneer thickness is measured before sanding. | ||||
| *If you intend to use this on an exterior exposure application you must completely seal all edges and faces to keep water from penetrating into the plywood. 4 coats of Smith's clear penetrating epoxy (or equivalent) must be applied to all edges and 2 coats to both faces. A minimum of 10 coats of exterior varnish (Spar varnish or equivalent) must be applied to all edges with at least 6 coats applied to the good face and 2 coats on the back. No warranty is available and never use below the water line. | ||||
|
Specifications: Core Plywood Bonding Type: The core plywood bonding shall be WPB and meet the test requirements of this British Standard and using an adhesive of the type which by systematic tests and by records in service of the product over many years has been proven highly resistant to weather, micro-organisms, cold and boiling water, steam and dry heat. The British Standard applies to plywood made with untreated tropical hardwood veneers having a suitable prescribed level of resistance to fungal attack with a bond of WBP glue quality between the plies. It does not need to be "British made" material. Face Plywood Bonding Type: The face veneer shall be bonded to the BS 1088 core plywood with type I exterior glue. Marine Plywood by Homestead does not warranty type I exterior glue bond for exterior applications. However good success has been attained in exterior above water line applications when all sides and edges are sealed per above instructions. Quality of Core Veneers: BS 1088 British Standard Specification for marine plywood manufactured from selected untreated tropical hardwoods. Fire treating is available and as a separate process after manufacture. Core veneers shall be meranti, gurjan, okoume or subspecies there of also known by the trade names Joubert, HydroCore, HydroTech or PowerPly. Small splits are permitted, and there is no limitation on the number of pin knots or edge joints. Discoloration is permissible, provided it is free from dote. Veneers need not be matched for color. There shall be no end joints. Veneers shall be smoothly cut. Quality of Face Veneers: Face veneer shall be plain, rift or quarter sliced. The method of cutting is at the option of the manufacturer unless it is specified by the purchaser at the time of ordering. These shall present a solid surface, free from open defects. They shall be free from knots, other than sound pin knots, of which there shall be no more than 6 in any area 30cm square , and not more than an average of 2 per 30 cm square over the whole area of the board. The veneers shall be reasonably free from irregular grain, due note being taken to the characteristics of the species being used. Isolated pinholes not along the plane of the veneers, and occasional closed splits are permissible. Veneers showing compression failure shall be excluded. Occasional minor discoloration is permissible. Core Veneer Thickness: Tolerances of the core veneers vary as follows. 4mm +.02/-0.6 6mm, +.04/-0.65 9mm, +.06/-0.75 12mm +.09/-0.82 15mm +.1/-0.9 18mm +.12/-0.98 22mm From the above we can assume that 6mm material will arrive at thickness between 6.04 mm and 5.35mm Face Veneer Thickness: Standard face veneer thickness shall be at least .6mm measured before sanding. Premium face veneer thickness shall be at least 1.4 mm measured before sanding. A face veneer may also be applied to the back of the core plywood to balance the sheet but is not mandatory. |
||||
|
To generate an immediate quote including shipping please use our online shopping cart.
For direct ship orders:
For yard pick-up orders or
immediate assistance:
Homestead Hardwoods |
||||
